Regular annual maintenance keeps your system operating at peak efficiency. Experience has shown that a system that runs well keeps your utility costs in line — in fact, independent 3rd party research shows that you can save over $30 per month on utility bills. Periodic tune-ups also allow us to detect any minor problems that, if left unattended, could develop into serious hazards in the future.
Maintenance members will have guaranteed emergency service response, priority scheduling, regular maintenance, discounts on repairs and longer warranty coverage. Savings from the repair and equipment discounts alone can, in many cases, pay for the cost of the plan.
Get All 3 Maintenance Plans for just $399 or $35/mo!
2 Visits / Year
Clean Indoor & Outdoor coils
HVAC Maintenance & Inspection
Safety Checks & Tests
Member Benefits
$200 Individually*
* For 1 Zone ($160 for additional zone.) Does not include add-on items (e.g., filtration, uv, etc.).
1 Visit / Year
Water Heater Maintenance
50 Point Whole Home Inspection with Drain Tests
Safety Checks & Instructions
Member Benefits
$190 Individually
1 Visit / Year
1 Free Standard Outlet or
Light Switch Change Out (during same visit)
Home Electrical Inspection
Safety Checks & Tests
Member Benefits
$190 Individually
$32 Diagnostic Fee
(Instead of the business hour fee of $72.95 or the after hour fee of $120)
Priority Scheduling
15% OFF on all Repairs
Member Only Specials
1 Year Warranty On Parts
(With continuous coverage, HVAC parts are warrantied for up to 3 years.)
HVAC MAINTENANCE:
• Clean Indoor and Outdoor coil with specialty cleaner • Test Refrigerant Levels, Capacitors, Starting
Capabilities, Defrost Cycle, Safeties, and Backup
Electrical Heat
• Install Drain Tablet to Reduce Algae Buildup • Flush Drain Lines
• Check & Tighten Electrical Connections
• Inspect Fuel Pipe
• Measure Amp Draw and Electrical Current
• Check Blower Wheel
• Lubricate Moving Parts
ELECTRICAL MAINTENANCE:
• Test ground fault receptacles for sensitivity.
• Test the smoke detectors to ensure proper operation.
• Test the smoke detectors circuitry for interconnection. • Replace the batteries in the smoke detector as needed. • Check and tighten the house grounding system.
• Check main service cable termination.
• Check all wiring in the main panel for proper sizing.
• Check the main panel for ARC fault protection.
• Tighten all electrical connections in the main panel.
• Oxidation inspection for all aluminum panel wires.
• Check attic fan for proper operation.
PLUMBING MAINTENANCE:
• 50 Point Whole Home Inspection: Inspection and testing of every room with plumbing present, attic, crawl space and outdoor fixture for leaks, corrosion, and proper installation.
- Kitchen: faucets, sink, drainage & appliance hookups - Bathrooms: faucets, vanities, tubs, showers & toilets - Laundry Room: washer valves, hoses, sinks & vents - Main Shut Off Valve: Type, size, and location
- Well Pump: condition, piping, expansion tank, gauges & valves
- Outdoor Spigots or Showers
- Crawl Space and Attic: water pipe, drain pipe, gas
pipe, piping material & condition, annotation of any
issues not related to plumbing.
• Check for correct drain installation to ensure clogs and smells are best minimized.
• Tankless Water Heater: descaling, cleaning flame rods, filters and any debris or dust inside unit.
• Tank Water Heaters: flushing the unit, checking gas valve for assembly and proper function, cleaning any debris, dust, and the screen if present.
Your Generator Maintenance & Safety Plan
Full Service 1 Visit / Year
1 Year Contract - $300
3 Year Contract - $847
5 Year Contract - $1,324
The 5 Year Contract includes one free battery and installation at time of maintenance during the term of the contract. $134 value
Full Service 1 Visit / Year
1 Year Contract - $459
3 Year Contract - $1,289
5 Year Contract - $2,000
The 5 Year Contract includes one free battery and installation at time of maintenance during the term of the contract. $134 value.
Maintenance contract customers (2 years or more) receive 20% discount on service and diagnostic fee and 15% discount on parts and labor for generator repairs.
• Full contract amount is due at signing. Full payment begins start date. • Location of generator may alter service agreement price.
• No repairs included in the service agreement price.
• Oil & Filter Change (synthetic oil)
• Check Coolant Level (liquid cooled units only)
• Check Belts & Hoses (liquid cooled units only)
• Check & Lube all Contact Points
• Check all Electrical Connections
• Test Transfer Switch & Lube Contact Point
• Check Proper Voltage
• Perform Power Transfer & Check Operation • Check Air Filter and replace as Necessary • Check & Re-gap Spark Plugs
See The Full Plan Details Here.